Friday, November 6, 2009

The Cruise Control on my 04 Gold Wing won't stay set.?

It pops off, after being set, as I drive. The problem seems to be coming from the front brake lever. If I push forward on that lever, the crusie stays set. About as soon as I release the forward pressure on brak lever, the cruise control unsets.
The Cruise Control on my 04 Gold Wing won't stay set.?
Sound like the slack in the brake lever is interfering with the cruise controls break release control. Adjust the cable tension at the lever just enough to keep a little tension on it and that should solve your problem.
The Cruise Control on my 04 Gold Wing won't stay set.?
see my eyebrow rise, Motogp?


an 04 Wing with a brake cable?


no idea if the play in the lever can be adjusted, not interested in getting close enough to a Wing to find out


but is has hydraulicly operated brakes on both ends for sure
Reply:The switch also activates the rear brake light.


Does the brake light stay on?


May need a new switch.

Genealogy

How many miles can you get out of a 650 single before the engine needs and overhaul?

...assuming it's properly maintained.





I'm talking about a DR or a KLR 650. I've heard 20 up to 100K. Anyone out there ever burned one out? If so how many miles did you get out of it. What was your next move? New engine? Rebuild? Or new bike?





I just bought a new DR 650 and am using it as my main commuter. The miles are racking up fast. I'm trying to get a feel for how long it will live.
How many miles can you get out of a 650 single before the engine needs and overhaul?
you know this is an impossible question to answer, do you?





it depends ...


on your riding style


your maintenance style


maybe even the oil you use


the specific bike - some seem more in tune than others


where you ride - stop'n'go at 100 degrees vs. overland at more moderate temperatures





it will "live" until it "dies" - so simple
How many miles can you get out of a 650 single before the engine needs and overhaul?
It depends on how and where it's ridden, and sometimes when. It also depends on what oils are used, and how often they're changed. A good warm up, frequent oil changes and modest riding, you could expect around 100K or more, but cam chains don't last long on singles, and 50K for a top end is often enough to need a chain and tensioners. Harsher than theat, and you'll get much less. NB the oil feed to the top end is critical, and non-return valves are often unreliable, so from startup, make sure the oil has arrived there from the oil pump before moving off.


How do you sell a yamaha rhino with no title???

its paid for and we want to sell it... how do you get a title?? or in nevada do you need a title to sell something??
How do you sell a yamaha rhino with no title???
A bill of sale should be enough. Make sure to include the make/model/year/VIN#. You may want to ask your closest dealership about a lost title or how to obtain one from the original dealer.
How do you sell a yamaha rhino with no title???
heres the deal, you can sell anything without a title however


any one wanting to buy it will want it, cheap . real cheap


go get a title asap. make the money you need, check out


blue book.com for the right price to sell ...
Reply:Heh, you can't really do anything until you call the bank and ask for a release of lien and your title back.





Calling DMV will do nothing. Same with Filing for a salvage.
Reply:In AZ, here's how its done:





Go to the MVD, request a duplicate title for an already-registered vehicle. Prove you are you, and it is yours [by the registration]. A new replacement title is $20.





I am sure NV is similar.


Buying a motorcycle but parents will not let me????

hey. im 17 right now, and i will be 18 in about 3 months. i told them i want a kawasaki ninja 250 or 500. but they say as long as i am living under their roof i cant buy one. i told them the day i turn 18 is the day im going to get a bike, so its either now or then, right now i have about 1200$ whats a good bike i can get for around 2300$? i only work in the summer because i have school otherwise. I am taking a msf course here soon also. how is the insurance on one of these? and also, how owuld i go about convincing my parents into letting me get a motorcycle? they said if i get one, they will sell my truck ( wich i have put alot of $ into it moddifing it.) , wich i do not think is right at all, i should get my money back that i put into it if they do do that. any way, any info would be appreciated.
Buying a motorcycle but parents will not let me????
used honda rebel, good on gas, easy to use, not the kind youd like though, but still a bike, you should also take your parents with you to first few MSF courses, so they can talk with a professional, and discuss the safety aspects.
Buying a motorcycle but parents will not let me????
Try to play up the "gas is too expensive" factor.





Ive been in a motorcycle accident and I never will get on another one ever.


So I see their point of view. They love you. Not everyone has that.
Reply:you dont listen do you????





the important question is.... where are you going to live when you buy the bike....





your parents said not under this roof....





so appartments are worth around the $1000 a month...





dosnt leave much for the bike.....
Reply:As long as you live under your parents' roof you need to honor their rules. So when you figure out how much you need for the bike, insurance, MSF, gear, tax and title, don't forget rent, food and utilities.
Reply:Smart Parents





Dont be in a hurry to die

lilac

Do you know of...?

I was wondering if anyone knew of any used motorcycle dealerships? Im looking in the Massachusetts area.








Thanks for the help.
Do you know of...?
No. But if you look in the yellow pages of the phone book I am sure you will find some if there are any.
Do you know of...?
Most of the new bike dealerships sell used bikes.





You can also look for independent motorcycle repair shops. They will sometimes have used bikes for sale.





I don't remember every running across a used bike only dealership, though it wouldn't surprise me if there is one somewhere.


Will a 1995 HONDA XR200 engine and transmission fit a 2005 honda xr400?

my 400 engine blew i was wondering if it would fit and if it did would i lose a lot of power or just a little?


I have a 2007 cbr 600rr I want to know which brand of sportbike boot, will add the most height (how many "'s?)

Just buy the ones that are comfortable then go see a cobbler and have higher soles added on. Height challanged women do this all the time. Just be sure that the new sole isn't so thick that it interferes with operation of the shifter and brake.


What kind of gas mileage would motocross little type bike get?

in particular the DR-Z400S suzuki bike. Also has fast can it go, and can you drive it on the highway? its got 398cc's
What kind of gas mileage would motocross little type bike get?
motocross bikes dont have odometers, or speedometers. and are not streetlegal. dual-purpose or trail bikes have them and are streetlegal. most of them are great for around town put on highway at speed sof 70+ mph they are close to tapped out. you will be running them hard at speeds like that or over. must have no problem with 55 to 65 mph sustained speeds.


quote from another website--


" I've found my DRZ MPg to be inversely related to the speed I travel. With stock gearing, 55mph netted 50MPG, 70 got ~44MPG, 80+mph tanked at 35MPG."


Which motorcycle boot adds the most height?

Icon Bombshell.


Will a sportbike accelerate more quickly than a cruiser with the same engine size?

Will a Ninja 250 beat a Honda Rebel?


Would a Ninja 650 beat a Honda Shadow?





I don't whether I should look into a sportbike or a cruiser for my first motorcycle. Any information would be appreciated.
Will a sportbike accelerate more quickly than a cruiser with the same engine size?
there are 250's that can beat 500's out there, so your Q is not really sensible. BTW I hope you slow down and live to learn to ride well. Anyone can ride fast enough to be dangerous to themselves, and/or others. We riders need you young blokes to live to take over the fight when we're gone.
Will a sportbike accelerate more quickly than a cruiser with the same engine size?
Ninja for a first bike=hospital time





better learn on the Honda





ya the sport is made to go fast,,bigger carb more air flow etc.
Reply:Cruisers create less stress on the body for extended time in the saddle.


If both have the same horsepower and the same gearing then both are equal from a stop. At speed the sportbike has the aerodynamic advantage and will probably reach a higher top speed quicker.
Reply:Yes, a sport bike with the same size engine will beat a cruiser every time. The two are made to be ridden in different ways. The name says it all SPORT bike, fast, nimble, requires more rider skill to use to potential, easier to get in over your head and out ride your ability. CRUISER bike, slower, more forgiving, less costly insurance, more comfortable.
Reply:Most of the time a sportbike will out accelerate a cruiser with over twice the engine size, but there are a few power cruisers that defy this general rule. A 600cc stock will out perform 1200cc air cooled bike all day. An old v-max bike will surprise many 600cc riders so there are exceptions, I cannot name them all but Yamaha makes a few, as do the other Jap manufactures. Harley's v-rod will put up a good race and even beat 600cc rocket with a good driver, I have not seen this happen at a track yet but the numbers say they could with a better driver. Heck the new ninja 250 has better quarter mile times than the big sportster, check motorcyclist.com for the real numbers by pro drivers. Once the bikes are modified all bets are off on that one though.
Reply:DEFINITELY!





sport bikes tend to have double to triple the power of their cruiser counterparts
Reply:Absolutely.





The displacement is only part of the equation.





With the exception of the ninja 250 (which I am pretty sure only has 2 cylinders) most sportbikes have 4 cylinder in-line engines, as opposed to cruisers which almost all have v-twins.





They usually have oversized carbs, overhead cams, and run much higher RPM's, which - combined with the right gearing, and sprocket set - give you ridiculous amounts of power. On top of this, they are usually much lighter as well.





Definitely avoid sportbikes for your first motorcycle. For one, they are much too powerful (although the 250 ninja probably isn't too bad) - the riding position is uncomfortable, and isn't good for learning how to ride. Also - when (not if) you drop it, a sport bike has way too much plastic on it, and it will get messed up bad.





I usually suggest learning to ride on a used dirt bike, or enduro style bike (on/offroad). They can take a lot more abuse than a sportbike or a cruiser. Once you are more comfortable, then get something that looks nice, and has more performance.





It is also suggestable to take a riding course - some states require doing this in order to get your motorcycle license.





I'm not necessarily anti-sportbike, but a lot of inexperienced riders get on equipment that is basically designed for racing, and go out and kill themselves on it. I just attended a funeral for one of my friends from high school who did just that.





I mostly stick to cruisers - my '06 Suzuki Boulevard C50 has plenty of torque, and is pretty nimble for a cruiser. 800cc, fuel injected (no carbs), liquid cooled, and shaft drive (no chains/belts to wear out). It has an adjustable uni-shock in the back (no ugly springs), floorboards (for the rider) and a heel-toe shifter. The only thing I added was a seat back.





The 450cc version would probably make a decent starter bike (although you should definitely consider learning on a dirt bike).





The most important thing to remember is - people in cars are not looking for you. Most of the courses tell you to pretend like you are invisible.





I take it a step further and pretend like people are actively trying to kill me - that way when someone swerves across three lanes of traffic, and stands up on their brakes in front of you - you aren't surprised (had this happen about a week after I got that suzuki - I dropped two gears, locked up both brakes, and slid to a stop right at the guys bumper - he is lucky to still be alive, I was shaking so bad, if I had gotten off that bike - I would've twisted his head clean off)





With that said - as long as you are careful, keep your bike well maintained, and watch out - motorcycling can be the most fun you will ever have.





Good luck!
Reply:Yes the sport bike should be faster. The motor may be the same size but the cams carbs gearing are different. Except for the rebel anything can out run a rebel. Some one who knew motocycles would not have had to ask.


Has anyone used Bio-Fuel?

Can a Suzuki Hayabusa run off of Bio-fuel (B85), and if so do it burn cleaner in your engine and what kind of performance drawbacks or benefits do it have. The owner's manual suggest 89 mid-grade fuel, and also states that gasohol may be used (grain,alcohol) if the ethanol content is not greater than 10%. Has anyone put this concept to real world practice and what was the results?
Has anyone used Bio-Fuel?
Don't try running the E85, your fuel injection system isn't calibrated for it. There's fewer Btu's in an equal amount of ethanol than in gasoline and the result will be a very lean mixture. E85 also delivers less gas mileage because of it's lower energy content.
Has anyone used Bio-Fuel?
E85 is 85% ethanol so you can not use it in a bike with worrying about the ethanol causing many problems in a short time. They say you could use 10% max but why do it, you will get less miles per gallon with it.
Reply:Less output due to the less BTU's that B85 puts out.





Now if you have more alcohol in your system get ready to replace seals in your fuel system.
Reply:Ethanol content of 10% is pretty much standard practice now.


They use the ethanol instead of MBTE to oxygenate the fuel so it burns cleaner. Essentially, the ethanol is an additive, not the fuel.


Does a 149cc scooter require a m1 or m2 license in california?

It looks like you need at least a M2 license in Cali for a 149cc scooter.


Hondal XL 500 1978?

I have an old XL 500. I want to take the clutch/or flywheel off, what ever it is called. I took the side pannel off. The are four spring loaded blots that seem to be holding it on. Can I just take these off??? Is there much trouble putting these back on.





Thanks
Hondal XL 500 1978?
Just take them out. The bolts are longer than the springs.
Hondal XL 500 1978?
Looks like a conventional clutch to me. Go to www.bikebandit.com. Then OEM PARTS - Honda - 1979 ( there's no fiches listed for 1978) Then select XL500S Link. Look at the diagram for the clutch advancer and you'll see an exploded parts diagram for your bike. You can take the four screws out easily - they should have springs around them. These are the clutch return springs. If they are old and worn ( you can measure the height if you have the specs) then your clutch may not return fully and can slip. I would suggest replacing them as they are fairly cheap. If you can see the diagram though it would appear the whole assembly is retained with a nut ( item 20). In order remove the clutch assembly you'll probably have to remove this nut. BE CAREFUL here - the clutch basket is light aluminum and if you try and grip it or jam it it will break. A better suggestion is to jam the steel drive gears at the base of the clutch basket. Sometimes just a rag is enough - other times a large screwdriver between the gears should do it. Once you've undone the lock nut the basket should come apart. Don't mix up the clutch plates - they have to go back the same way as they came out. Also measure the plates if you can and replace any worn ones - as they usually wear all together do them all. Don't forget to measure the metal plates 6 and 13 too as they can also wear and reduce clutch efficiency. Also check in the service manual whether or not the lock nut (20) is a discard item - sometimes they are one use only - nothing like having your whole clutch come apart in the middle of nowhere for a 5 buck nut! Good Luck - get a service manual too - they really do help and can save you far more than the cost of the book. Ebay's a real good source for good ones.

tanning

How would it be possible to be a pillion passenger on someones Yamaha DT125 bike or similar machine please?

I realise this may seem a weird question,but i just love these bikes,%26amp; have always wondered what it would be like to be a passeenger on one,or even have ago at riding one of these types of motorcycles.


I don't know anyone who has one.Any suggestions folks please?


I live in the United Kingdom.


Btw this is a genuine question,in case anyone was wondering.


I dont really like the ordinary road bikes.
How would it be possible to be a pillion passenger on someones Yamaha DT125 bike or similar machine please?
Not much difference really, it's just higher off the ground. Being a passenger for the first time is quite scary, but it gets fun really quickly. Riding on Your own is even more fun.
How would it be possible to be a pillion passenger on someones Yamaha DT125 bike or similar machine please?
If you want to find out how it feels to ride one off-road (or something similar, but more potent)


http://www.yamaha-schools.co.uk/





They are great learner bikes if you want to start. Although they can take a pillion they are much more fun in front.
Reply:ive a xtz660..basically its a large desert bike...loosly designed on the paris dakar bikes..bloody great fun.


road bikes are ok,but you cant go over mountains on them...


have a look at my site below...


i ran a computer shop a while ago,a old woman in her 70 asked me for a go on the back,i obliged....she loved,really loverd it...


2001 Harley Davidson Nightrain fork dimensions.?

are the size of a '01 HD nightrain forks the same as the 2005 Harley Davidson Softail Deluxe front forks?
2001 Harley Davidson Nightrain fork dimensions.?
If i remember right, aren't they both wide glide front ends? 39mm with a 21" front wheel. I think thats right


Motorcycle learning permit on freeway?

I have a motorcycle learning permit but my motorcycle is in las vegas. I live in california.. I have to get it in two days and don't really have any other option than to ride it on the freeway(I-15) home.. does anyone know how much trouble I will get in if by chance I get pulled over...
Motorcycle learning permit on freeway?
There are highway routes, but you will have to go further.





Which on a motorcycle (as long as it is in good repair) is usually a good thing.
Motorcycle learning permit on freeway?
they will scold you maybe, but they really don't care...just don't be riding like a squid...


1983 gl 1100 suki bike , need a manual ........ help?

ive tryed the book for cars site, to no avail....


any help on finding one, or do u own one i can buy


willing to pay around $20 for a good one
1983 gl 1100 suki bike , need a manual ........ help?
Did you try JCwhitney.com and look under motorcycles?





I'm pretty sure that there is a clymer manual for your bike.
1983 gl 1100 suki bike , need a manual ........ help?
Here's one you can download for free.





It's a actual Suzuki manual,,scanned into the 'puter file,





Go here


http://www.repairmanualclub.com





You'll have to register,,but it's free and just takes a minute.





Then get back to the site and search for


gs1000.





Save it on your computer,,,and then you can access quick %26amp; easy.





There's a section on each GS1000 version at the end of the manual.


Basically all the versions over several years are "The Same",,,,Trim varies but the Tech Details are same.





.........................................


Here's a link to Parts Catalogue with blow-up pics,etc,,,,might help a bit also





http://www.mrcycles.com/fiche_section_de...





..................


Those were excellent bikes,,,about as good an all-around bike as the Japs have ever made.





Good Luck

floral

What kind of motorcycle is this?

I am pretty sure this is really decked out but what kind of bike is it?





http://i26.tinypic.com/2ai3eoj.jpg
What kind of motorcycle is this?
A red one with a idiot on top
What kind of motorcycle is this?
It's extremely modified but it seems like it once was ether a smaller Kawasaki or Honda
Reply:It might be a Suzuki GSX, or an Aprilla...





Kind of hard to tell, but it's got a beautiful paint job.





(Too bad someone is probably going to put themselves in traction riding it - if not into a grave).
Reply:looks like a cbr 600RR, if i could see the headlights or tailights it would be easier to tell
Reply:It's a SQUIDMASTER 650.


Ducati, Aprilia, Triumph, KTM or MV Agusta?

I want to have a Supersport bike that is non-conventional, that is neither of the four Japanese titans where they could easily get old and depreciate. And I know that Europeans have more of the heritage than them.





Which is the European brands is best to own in terms of reliability and racing?
Ducati, Aprilia, Triumph, KTM or MV Agusta?
Motorcycle USA website usually throws in a few euro bikes for their supersports tests: worth a look.





My favourite is the Aprilia RSV but the MV 312 is awesome. The MV is inline 4 like the jap bikes so an easier comparison. Other euro sports bikes to consider are:


Triumph Daytona (675 and 1050)


BMW K1200R


Ducati make good all round bikes but they are a little overpriced considering the sales volume and componentry.
Ducati, Aprilia, Triumph, KTM or MV Agusta?
Ducati - very nice- very expensive -need lots of TLC - a fine machine though the dry clutch can make it sound like a bag of wrenches.





Aprilla - Nice bike but I thought they're out of business - could be wrong but I'd check ( parts service warranty may be an issue)





KTM - nice but unproven yet also spendy





MV Augusta - F4 is beautiful but pricey.





Triumph - my favorite is the 675 a dynamite piece of kit that's capable of track days but won't break the bank.





They're all getting pretty reliable now it's just a question of cost and servicing. Also buy the proper gear - leathers and get some frame sliders and race day "Cheap" plastic farings if you're going to try it on the track - you will almost certainly dump one at some time and then the fun really starts! Good luck I don't think you'd be disappointed with any of those brands so I just think of the cost!!
Reply:given the option i'd take the duc, their 1098 has really hit the spot...
Reply:European motorcycles are just as reliable as the Japanese bikes but require more servicing/shorter service interval at a higher cost. I would go with Ducati because of the parts availability,the aftermarket help/options, and there are more service centers/dealers.
Reply:From a racing point of view the recent (10+ years) results indicate that Ducati is the top dog from the five in track and road racing, notably WSB, KTM are top of the off-road results their MotoGP involvement was a bit of a failure but the RC8 is well-reviewed. Aprilia mainly race in the smaller GP classes and very successfully. Triumph have largely not been involved in racing although they are in the Supersports section of Superbikes. MV Agusta are not the same marque that was so successful in the 50s and 60s and are not that involved in racing outside 2008 Superbike teams.





All make capable and droolworthy bikes, if I had the money and/or inclination I would go with the RC8, but each marque might find a place in my dream garage.


Where can i compare rates for motorcycle insurance?

Type that into your Google bar. Most insurance sites will do a comparison for you. Progressive is one.


How do I check the oil on my motorcycle??

I own a 1997 Suzuki LS650 Savage. Single cylinder. I am trying to read the manual on the bike about this, but it does not tell me much. It says that there is a window, but they are showing the cap as a window. I am confused. I though there would be a window on the motor. I don't see one. In the cap, it looks like a L that I am taking for low? But it could be a seven? Anyone know this year and make bike help me out please??
How do I check the oil on my motorcycle??
Most have a sight glass on the side of the engine - if yours has a dipstick built into the cap, and it says 'L' then I think I would agree with your assessment.





Make sure to get the right kind of oil for your bike, and if it has been a while (or never) then consider draining it, replacing the filter, and putting some synthetic or synthetic blend.
How do I check the oil on my motorcycle??
not sure on the 97.. but on mine the window was on the side of the motor near the brake pedal..





if you send me your email address I can send you a file of exploded parts diagrams,,





cant send files on this site..

purchase flowers

Whats a 07 ttr230 worth?

its been jeted and has a gytr pipe on it and 4 years left on warranty???
Whats a 07 ttr230 worth?
about $4800 AU


Purchasing a motorcycle from a dealer...?

I have ridden motorcyles for many years and I am licensed to drive one but I've always purchased used from private parties. For the first time I am buying from a dealer and they seem like it's a problem for me to test drive the bike. I've already filled out a credit application and have been approved.





My question: Is this a normal practice for Motorcyle Dealers to not let people test drive a bike before they purchase? The dealer has been around for over 20 years.
Purchasing a motorcycle from a dealer...?
They are usually pretty hesitant to do so - since they can't go with you, and bikes are REALLY easy to drop.





Maybe find out if they have a used bike on the lot that is similar to the one you are thinking about purchasing (maybe a prior year model with a few miles on it) that they will let you test ride.





It wouldn't be exactly like it, but you could get an idea.





I lucked out - one of my friends bought an '06 Suzuki Boulevard C50, and let me ride it (he knew I had way more experience than he did - and that I would be very careful with it). I was so impressed I went and bought myself one.





Very nice bike - looks sharp, isn't a rocketship or anything, but it isn't a dog either.





Fuel injected, liquid cooled, and shaft drive. All for around $7K - brand new.





You can't beat that with a stick.
Purchasing a motorcycle from a dealer...?
Yes, they don't like to do test drives, but some will with a copy of your license and/or name of your insurance company. You may need to let them know how serious you are about buying. Most dealers just expect you to know what you want.
Reply:Yes, it is normal practice. Too much Liability and risk to their interest. If You know which bike You are interested in, often at big Bike events such as bike week some of the companies offer test rides at a track or other closed enviornment.
Reply:Yes, it's normal practice, but totally unnecessary.





We have a Triumph/Ducati dealer here who allows test rides on all used bikes and usually has demos of the new bikes to ride. He has a 30 mile loop and lets you go on your own.





The rest of the dealers in town generally allow accompanied test rides on used bikes (the sales person follows on another bike) when they aren't busy, but do not have new bike demos.
Reply:I've had no problem test riding Triumphs and Victory's. We have a Ducati dealer in town who also offers test rides. The Japanese bike dealers though have been very remiss to allow test rides.
Reply:ok im going to break it down for everyone because i am a dealer. dealers hate giving test rides for these reasons first the insurence part of it. second even if the person is licensed who know if they are really going to be able to handle is new bike on there first time out. next must bike companies dont get demo bike from the factories so then after the test ride if the person doesn't buy they have a used bike. and lastly i have let people take test rides and you know what only half of those people went ahead with the purchase. and the other half tire kickers and just cost me a lot of money. and finally myself personly have owned tons of bikes before test riding and loved them all. ill leave you with two things. one, i a customer says to me that "i'm not buying anything untill he can ride it" right away i know he is wasting my time and he is full of it and that he is not buying anything. with that said if you really want a test ride i would say that i might be a good idea throw some money around. give them a $500 deposit on the bike show your not blowing smoke


Whats the max speed for 49cc mopeds?

I am wanting to get a 49cc moped because im allowed to drive one in state of kansas legally with a instructors permit. I am wondering what the max speed for mopeds are becuase on ebay some say 30mph and some say 45 mph. Is there a maximum speed to be considered as a 49cc moped in kansas?
Whats the max speed for 49cc mopeds?
KANSAS syas that you can ride with a DRIVERS license only, or a limited MOPED only license.





A Moped in Kansas is no more than 30mph and no more than 50cc`s.





if its a 50 but goes 45mph, then you need a Motorcycle endorsement!





Same with scooters too. Mopeds have skinny large wheels and pedals.





they allow "motorized" bicycles up to 135cc`s, But thats only to allow Whizzers and Whizzer replicas,which have a flathead type 4 stroke motor which have larger displacements but put out little horsepower, like a Briggs and Stratton.


Wats the most ccs a learner motorbike rider can have? i weigh 54kg and i am 168cm tall?

250cc

fruit gift baskets

What is the metal rubbing sound coming from near the chain and front sproket?

The bike is a 2002 yamaha zyf r1 now before we changed the transmission the chain was clacking and i was using chain lube to quiet it. the trans is fine and shifts well. the engine has great power. and there is no clacking of chain, JUST THE METAL RUBBING SOUND.
What is the metal rubbing sound coming from near the chain and front sproket?
Check your chain tension or possible chain %26amp; sprocket damage.
What is the metal rubbing sound coming from near the chain and front sproket?
check the chain cover,if ever there's scratch in it.check also the bolt or lock that hold the front sprocket,might be too long bolt or broken ;ock and the sprocket is touching the casing...if everything is okey,,I'm afraid it's the clutch housing inside...or worst..\\,yhe bearings in transmission


Anyone with a Valkyrie trike or other trike without reverse?

I currently have a Vulcan 800 Drifter that I love. I've been thinking about getting a trike too for more storage space on trips. How do you handle parking a trike without reverse on it? It seems like it would really limit your parking places and manueverability when parking. I'm only 5'4 and worried I wouldn't be able to push it out of/in to situations. Of course I'm dreaming about a Valkyrie trike. Thanks.
Anyone with a Valkyrie trike or other trike without reverse?
I thought the Valkyrie did have a reverse. Isnt it based on a Goldwing? I was nearly sure all Goldwings had a reverse gear.





Anyway, to answer your question..





We had the displeasure of working on probably the worst trike in history. It was a Yamaha 1100 converted to a trike. From memory it was a Virago or something equally unapealling.





It had 10" rear tyres, a locked diff and no reverse gear.





It took 3 of us to push backwards into the workshop and where we wanted it to go.





Im not sure how you would cope. I read somewhere most of the newer trikes have reverse adapted to them with an electric gear driven motor and a button.
Anyone with a Valkyrie trike or other trike without reverse?
I ride with some that have a trike with no reverse. They just don't park in a place where it's uphill on the backout. They pull around and let gravity roll it back into the spot if possible.
Reply:You must pay attention to how and where you park, as with any large motorcycle.


Go this site. There is a lady who is a member of VRCC who has ridden a Valkyrie trike all over the country.





http://www.valkyrieforum.com/forum/main....


Can you ride a TWOSTROKE on government dirtbike riding areas in california humboldt?

NOT THE STREET ! BUT GOVERNMENT DIRTBIKE RIDING AREAS
Can you ride a TWOSTROKE on government dirtbike riding areas in california humboldt?
depends, is it a green sticker??? if yes then you can if not you only can in the winter.
Can you ride a TWOSTROKE on government dirtbike riding areas in california humboldt?
At the last Yamaha convention I went to, I was told that all 2strokes were outlawed from California.
Reply:WHAT year? if it`s old, they may let you.


Can anyone find a CDI Box for a motorcycle for me?

I was wondering if anyone could find me a CDI Box for my 1987 Honda CR80R. I cant seem to find one online and was wondering if someone could help me find one. Any websites or links would be great! Does anyone think any junkyards would have them in northern illinois?
Can anyone find a CDI Box for a motorcycle for me?
try dennis kirk
Can anyone find a CDI Box for a motorcycle for me?
Electric parts from junkyards have the same warranty as new, no returns once installed. You should be able to get a new one through any Honda dealer. Used will cost 50%-75% of new, with no idea of condition. If you can't find a new one, or insist on used, my local guy should have (or be able to get) one. He ships UPS. http://mcsalvage.com/
Reply:There's a few on Ebay that'll work





'95 model


http://cgi.ebay.com/ebaymotors/honda-cr8...


.........................................


'95 model





http://cgi.ebay.com/ebaymotors/HONDA-CR8...








.........................................


http://cgi.ebay.com/ebaymotors/GENUINE-H...





.........................................


http://cgi.ebay.com/ebaymotors/GENUINE-H...





...............................


I stumbled across this for $30 + $9 shipping.


Just thought I'd mention it.





http://cgi.ebay.com/ebaymotors/ws/eBayIS...








Good Luck

ginkgo

Do you need licence or learner permit to be able to drive a super pocket mini bike in boston,ma?

What is a super pocket mini? I hope you need a license
Do you need licence or learner permit to be able to drive a super pocket mini bike in boston,ma?
To be honest I'm not sure.





How about them LAKERS! :-)
Do you need licence or learner permit to be able to drive a super pocket mini bike in boston,ma?
These small bikes are not legal for use on public roads %26amp; streets anywhere in the US. So, you don't need a license to be legal, since it's already illegal.


I just piped my 87 Yamaha banshee and its smoking from the right pipe and the plugs are not bad what is this?

possible rings, or valve seals. you changed the compression when you piped it, less resistance on the exhaust valves.
I just piped my 87 Yamaha banshee and its smoking from the right pipe and the plugs are not bad what is this?
Banshee's are 2 stroke.





Forget the valves.





Possibly the carb on the right cylinder is out of tune and running too rich.





Take it to a dealer and give the carbs a tune and sync.
I just piped my 87 Yamaha banshee and its smoking from the right pipe and the plugs are not bad what is this?
you need to jet your carbs. this is normal when piping 2 strokes.


How much does a typical motorcycle battery cost?

i'm looking at a 1979 used suzuki for $500 with 50k miles, the owner tells me it runs well but needs a new battery so if anyone knows aprox how much it may cost, thanks.
How much does a typical motorcycle battery cost?
30-45.00
How much does a typical motorcycle battery cost?
Anywhere from 30 to over 100 dollars. Depends on what battery your bike needs and where you buy it. Sorry, I don't know what battery that bike takes.
Reply:If you are going to get one get a good one, even if its like $75. I see these people buying lawnmower batterys, and wonder why they have all these problems.
Reply:A common battery for this age and displacement is a Yuasa 12V-12 AH battery. If you don't want a geewhiz battery (gel filled glass mat, sealed so you never add water) you can get it for under $65.





And the key to operating with just a plain ordinary battery is to hook the battery up to a battery charger over night, so it can avoid sulfation on other ills. This needs to be a sophisticated device and deliver a carefully calculated current, notify you when it is wired wrong and protect the battery by shuting off before it tells you, in fact a battery charger like an ACU-MAX 900 from Acumen. It will do a seriously good job of charging while not burning out electrical system on an old bike with crunchy wiring. Each evening I come home and I hook my battery charger up to my HONDAMATIC and I feel better about coming out in the afternoon, just starting it up, get on the highway without even using my choke, GO UP A HUGE HILL at MAXIMUM THROTTLE, and complete my half hour drive at top speed. When it gets me home one more time, I think, I REALLY think, it needs a bit of pampering, and only a battery charger will provide it, safely and conveniently.





No really these things will analyze the battery so you don't waste time on a bad battery and they recover, automatically, from a situaution that would kill the battery dead in its tracks. (My Hondamatic cannot be push started, you know, so I baby the electrics a bit, like NOT CONNECTING a completely stone dead battery and using your alternator to charge it. Honda says its a no-no, and we always do what honda says, right?
Reply:Dont buy a ricer over 10 years old.





They are a pain
Reply:About 50$. Too much for what you get.


I have another choke question please?

i ride half an hour on the motorway in the morning to get to work then i park it for around 6 or 7 hours. After work it usually starts real easy so i don't use the choke. I feel a bit mean though cos i get straight onto the motorway on this massive hill which my bike does not like at all and then i go as fast as i can all the way home for half an hour. Should i use the choke in the afternoon before i head home? Should i let her warm up for how long?
I have another choke question please?
I don't think the choke is needed unless it has a hard time starting. Just give it a little chance to warm up. My bike is very cold blooded and prefers to warm up a little even when I think it's warm enough out it shouldn't.
I have another choke question please?
If this is a modern bike and it is fuel-injected, your bikes engine speed is basically filtered through a processor chip, measuring the throttle opening. But of course it's not because you don't find chokes on these bikes in the first place. If you don't notice anything behaving strangely there is not much of anything you can do except waste gas, idling in the afternoon. If it feels good do it.





And how much heat will be generated by a stationary bike on fast idle, compared to getting you up that hill as fast as you can go? Not a problem. Treat your bike to an early oil change to square things!
Reply:The rule of thumb is to use the choke a little as possible. If the cylinder head is cold the fuel does not stay atomized and causes hard starting and that is when you need a choke. If the bike starts no problem without a choke then give it 30 seconds of warm up, enough time to put your helmet,jacket,and gloves on.
Reply:Usually choking needs in the morning time when you first start it. Rarely a few seconds may be needed, if the atmosphere is that cool. Please let your bike a checkup with mechanics.
Reply:if it is warm outside, you dont need the choke. just best to start it let it warm up the cylinder a little. it is hard on any engine to start right up and go instantly. give it atleast 30 seconds to a minute or 2. no more needed this lets the oil get flowing in the engine. the coolant to start to cycle in a bike that has it.

azalea tree

Yamaha 82 xv750 Virago How do I remove the allen head cap screw from the very bottom of fork it just turns.?

If you have already taken the springs out of the top, put them back in and try again. You need some pressure on the damper rod (what the screw is screwed into) to turn that screw out.





Sometimes, they get stuck and you need more pressure on the damper rod. Take the fork caps off the top, one at a time and remove the spring (careful, the springs may try to fly out of the tubes, they press up against the cap.). Stick a broom handle down the tube until it bottoms. Have a helper press down while you try to remove the screw.





Last resort, use an impact driver to remove the screw. Unfortunately, this can result in breakage if you aren't careful, but at least you will be able to get the damper rod out.
Yamaha 82 xv750 Virago How do I remove the allen head cap screw from the very bottom of fork it just turns.?
http://www.dansmc.com/MC_repaircourse.ht...





great site tells you how to fix lots...including forks..


How do i hotwire a motorcycle?

how do i hot wire a motorcycle, what wires go where?


what do i need to do?
How do i hotwire a motorcycle?
Go away.
How do i hotwire a motorcycle?
First off, you take the spark plug lead off and stick it in your mouth, then have a mate kick the bike over.





Thats one hell of a hot wire.
Reply:HA!





I had a '78 Honda 750 that had a bad ignition switch. I rode it around hot wired for at least 2 years.





Get a wiring diagram and follow the current.
Reply:"Refer to the 1st post"
Reply:You go to te ploice and ask them to arrest you before you do the deed.
Reply:Next question...."How do I pick open a pair of handcuffs?"
Reply:Easy, buy a bike, put the key in the ign(turn). then press start!!! Problem solved


Motorcycles?

what is a really fast, really nice motorcycle?
Motorcycles?
All sportbikes. If your asking which to buy, I recommend a Kawasaki 250 Ninja, great learning bike.
Motorcycles?
2008 Kawasaki ZX-10, for a litrebike it blows the competition away this year (this coming from a honda guy)





I just got a cycle world or motorcyclist or something today with a big pure speed test, this thing was killing everything.
Reply:Yamaha R1





100 miles an hour in first gear
Reply:Hayabusa by Susuki.


Will removing the internal parts inside the muffler of my new yamaha v star 1300 affect it's proformance

Like the baffle,catalitic converter,fiberglass shield things like that. Im looking to get a louder sound out of the pipes.
Will removing the internal parts inside the muffler of my new yamaha v star 1300 affect it's proformance
The sound change will have more of an effect than performance. The sound will be a little louder but somewhat raspier.
Will removing the internal parts inside the muffler of my new yamaha v star 1300 affect it's proformance
Your performance will probably suffer a bit.Bikes need a little back pressure to run their best.
Reply:YES! removing these parts will allow it to produce the MAXIMUM EAR DESTROYING SOUND, and some cop will come along and listen to you start it (because all the neighbors call and complain) and run his night stick up your tailpipe and write you a ticket for making an illegal modification to your motorcycle. It will not gain anything and it DOES have a catalytic converter, so it will void the emissions warranty as soon as you try it. And you will get a ticket for that as well, and no mechanic will touch your noise maker until you put them BACK in place.

lily

What's my bike worth?

I'm not selling it. I'm just curious what it's worth. 2002 Honda RC51 27,000 miles never raced or used for stunts, but ridden progressively hard. not abused. never wrecked.





now the meaningless extras......corbin seat, high level windscreen, carbon radiator fins, very recent 530 chain and steel sprockets - stock gearing, power commander 3 (not usb model), front and rear + clutch steel lines, high mount harris titanium exhaust, well maintained. all stock parts that were removed are included.
What's my bike worth?
enough
What's my bike worth?
2 of my buddies have the same bike Both paid around $4500 and one was stock, the other had pipes, You can get around $5k for the bike and all the aftermarket stuff (2002 and newer has updated swingarms) . Problem is, the bike is kind of rare and not many people know what is it. Its not common like a GSXR or CBR RR or NINJA. You just have to find the right person that loves to ride a V-Twin!! I hope your not going back to an Inline 4 bc you will miss the V-TWIN .


2001 Honda XR100R Stalls?

Hello:





My Honda stalls when I give it gas really fast, but only when at speeds near idle. If I am going just fast enough where I don't have to hold the clutch, and I give it all its got, it acts just as if I had held the kill switch.





I have also noticed some oil in the air filter, but it does not appear to have come through the carburetor.
2001 Honda XR100R Stalls?
the reason it stalls when you throttle up quickly is because the carburetor on that model is a mechanical slide type and if you throttle up too fast just off idle the engine gets air faster than fuel causing it to run too lean on the mixture to run. As far as the oil in the filter box it is probably coming from the crankcase breather tube due to regular pressure fluctuations in the crankcase. when was the last time you checked the filter before finding the oil? It will show up some over time.


My 2002 Kawasaki mean streak 1500 has a noise that sounds like piston slap?

sounds like it is comming from the lower end and the sound doesnt change with rpms does any one know what this might be i don't seem to get any real answers from the dealers mechanic and it just isn;t right Please suggestions help?
My 2002 Kawasaki mean streak 1500 has a noise that sounds like piston slap?
possible cam chain tensioner


Can u make an electric scooter louder??

Its odvious it doesnt have a muffler, is there anything i can to to make it louder??





ive looked at the motor, and i dont think so





(i know this aint a motorcycle, but u guys would be the only ones to know, ive asked dirtbike questions and got great answers!!)
Can u make an electric scooter louder??
nope...


if you want noise go for a gas pwered scooter.
Can u make an electric scooter louder??
put baseball cards in the spokes like all the cool kids
Reply:buy some portable speakers and run pre-recorded engine sounds on an mp3 player and crank it while you drive around.





If that doesn't work, the baseball cards are your only hope
Reply:baseball cards in spokes!!! lol
Reply:Jam a plastic pop bottle between the fork and the wheel. They will hear you coming a block away.
Reply:Hookup a set of speakers on the rear fender facing OUT! Then plug in your Ipod as a sound source, record some one with a GREAT SOUNDING bike, and if you can get a sensor for the speed to make it louder automatically, (Fat)bobs your Uncle.





It would require real work to make it work right, but some electric car maker has plans to hook up a sound track from a Ferrari. You could go into the business of equipping bikes with the sound track of their dreams!

myspaces.com

I have a choppper and i am looking for the seat you put on the rear fender for passengers. Who makes it?

Your nearest Big Dog dealer can order you a pillion seat, which is what its called, that has suction cups that stick to the rear fender. they are very secure and dont damage paint if your careful.
I have a choppper and i am looking for the seat you put on the rear fender for passengers. Who makes it?
look for a phantom pad, it looks great!
I have a choppper and i am looking for the seat you put on the rear fender for passengers. Who makes it?
Um, How do we know, man? I mean if you have seen this thing in use, you could look it up your self, on a search engine.





I found this on a search engine using "CHOPPER REAR SEAT fender mount passenger" and i found this one by Sundowner, he ordered it from the original maker of THE MOTORCYCLE.





http://www.streetchopperweb.com/tech/061...
Reply:Many make pillion pads.


I included a link to one catalog, there are many others.


I recommend staying away from the suction cup mount ones.


They are not safe, or legal for passenger use. Just looks.


(My state law says "firmly attached to the motorcycle")





http://www.jpcycles.com/search.aspx?Page...


Hotwiring a dirtbike?

how do i hotwre a street legal dirtbike, i lost my key and i need to permanently hotwire it, please help!!!
Hotwiring a dirtbike?
Go to your dealer with the frame/engine/VIN number and order a new key.





There are ways to hotwire the bike, but every time you get pulled over by the police you wil be hassled and also it will drain your battery as the power will also be running
Hotwiring a dirtbike?
there should be two wires running to the key all you should have to do is disconnect those and it should start with a kick if it is kick start if it is electric i dont really know
Reply:yeah, such a likely story.





You get a wire about 16 " long, and CRIMP a couple of spring clamps (battery charger or the like, now pull of the side cover, and hook from the FUSE BOX input to the output side of another fuse. Over time, when you have kickstarted it a few dozen times, it actually starts.





Leave your wire connected and replace the side cover, you probaly won't get the headlight this way, so we have ways of KNOWing if your story is true. You could make two of them and attempt to wire around the Ignition switch to the head light, but I'd settle for starting it so I could ride it to the shop and order a key set and the locks and switches I needed. So you know, I tried this back in the late 70s, and it worked with Hondas which had the fuses under the right side cover. pretty darn well.





It may not work on what you got. Those are the breaks!





If it works you will need to take the wire off or it will drain your battery.
Reply:Depends on what kind of dirtbike... there will probably be 4 wires going to the back of the switch... red, brown, black, %26amp; black/white.. clip the black %26amp; black/white ones %26amp; tape the ends to they aren't touching each other.... then connect the red %26amp; brown wires.. if it works, then hook a toggle switch between them..


First motorcycle?

I am looking to buy my first motorcycle. I have been riding my dirtbike for about two years, it is a 1979 yamaha 250. I am thinking about getting a 1985 - 1987 honda shadow. I am pretty sure this isnt to large or powerful to be a first road bike. I am just looking for some information on it. Weight, horsepower, top speed, etc... And what a good price would be.
First motorcycle?
Motorcyles are cool but be careful buddy.
First motorcycle?
The way you do it: Identify the PERFECT model, and its exact specification and type that into a search engine, with "Honda CB400A, 1978 statistics weight HP review gas mileage". only with your details. If there are any reviews out there, they will show up, and YOU can begin the long search. Mine makes 27 HP power whether i need them or not. And weighs about 400 pounds, oh and you can look up used motorcycle in Kelly's Bluebook, they even have a section on rare and collectible bikes like mine (max $2150).





Hows that for being to lazy to rob you of the fun of doing it yourself?
Reply:Ill give ya a hing on rice burners. If its over 10 years old, dont buy it. PERIOD.





You dont have the knowlege nor pocketbook to support it.
Reply:The Kymco Venox is such an excellent starter bike, beautiful, solid build, quality construction. Its a 250cc with the look of a 650 at least, motorcycle cruiser with lots of chrome, a real show stopper ! It outperforms all other 250cc bikes in its class.





I have been riding it for about 4-5 months and it am really very satisfied riding it. Top speed is about 75 mph but with a cruiser like this, you won't want to go faster, quite a comfortable ride with a deep growl engine sound. New ones can be had for $4,000 approx. and used ones (just a few years old with low mileage) go for $1800 and up.





Do a search for Kymco Venox in a search engine like Yahoo or Google and you can get more information on these. They are truly gorgeous bikes, trouble-free and very sturdy construction and well balanced.





Good luck, have fun and make sure to take the MSF Riding class (the course tales two and a half days) which is excellent to teach you riding skills and safe riding.
Reply:A 750 Honda Shadow is a good choice. About 40 horsepower, 95 mph top speed, cruise about 65. Will go 75 but needs rpm to do it. I'd buy a newer bike and one with shaft drive Not older than 10 years. I think 3500 will buy a nice one.
Reply:THe shadow is a good bike it is not to big but I have to agree with the other guy I own a Venox also and have rode all over for three years now on it trouble free. Including one trip over 900 miles. It might be worth a look at.


Would you exchange a 07 Fatboy for a 08 ABS Nightrod Special?

Some friend of mine wants to exchange his Nightrod 08 for my Fatboy 07, would you do that? thanks.
Would you exchange a 07 Fatboy for a 08 ABS Nightrod Special?
without hesitation
Would you exchange a 07 Fatboy for a 08 ABS Nightrod Special?
No, I don't like ABS.





I think the real question is WHY would he do that?

Genealogy

Should weight affect the power of your motorcycle?

I'm looking at getting a motorcycle sometime in the near future. I have already signed up for a class. I'm not exactly the smallest guy in the world. I'm 6'4 and roughly around 270 pounds, almost 300 around purchase time (muscle not fat). I was told I was to big for a Ninja 250R and I should look more into the 500 / 600 range. I wanted something cheap to fudge around on and gain more skill, but If I'm going to spend 9 grand on a bike, mine as well be one I'm going to have for a long time. Or am I just being a cocky moron. Ive ridden bikes before, but never owned, so I'm not really sure what to do.
Should weight affect the power of your motorcycle?
A Ninja 250 is way to small for you ---- Trust me on this on -- You will look silly riding a bike that small... You can get a 600CC for less than 9 grand.... I dont know where you got that idea but bikes brand new in 600CC can be had for less money.....
Should weight affect the power of your motorcycle?
Dude, as big as you are, nuttin under 800cc.





Maybe a United Motors/Hyosung CV650s.





For 9k your in the range of the Honda Shadows.
Reply:Dont even consider 250cc's. You would literally weigh more than them.





I'm 6foot and feel stupid on a 250.





Dont bother looking at sports bikes, you need to be looking at something like a cruiser.





Depending on your laws in your area, I would suggest a cruiser from Yamaha, Suzuki, Honda or Kawasaki around the 750cc size.





Go for a drive to the dealers and sit on a few bikes and see which one is comfortable for you.
Reply:Consider a Sportster, after your riding course and after you spend a couple days on a buddys well used bike.
Reply:weight does not effect the "power" of the motorcycle but it does effect the power to weight ratio! If you want to tool around on a motorcycle and learn/build new skills you can look for pre-owned or unsold pre-year bikes on a budget. as far as displacement the "danger" for a novice is the much greater potential horsepower/torque increase with every increase of throttle. larger displacement bikes will just bite you sooner if your a ham fist with them!
Reply:ok bottom line may be they all right!! BUT,


ask yourself what do u need the bike for?


if it just for going to work or just as a ( perfect cheap ) trasportation. so GO FOR IT


i've been riding ninja 250R for 2 years now and i changed two models ( almost the same) 2005 %26amp; 2006


its just perfect for me


the NINJA 250R ( even a good maintained preowned one) could get u -/+ 90 miles/hour in the highway


and regarding your weight i'm sure that it doesn't mattern what is the top speed but it could matter just a little bit in the speeding


i'm 220 lbs 5.8 and its perfect for me, plus my GF usually join alot of rides with me so its almost like 350 and believe me it still perfect ( we went in a trip for 150 miles on the highway) and we was like 85 - 95 miles/hour and it happend many times





add to this perfect on gas up to 40 - 50 miles or more per galon


and fun price 2000 - 2600 $ for a good used one 2005 - 2006





good luck and have fun


What kind of bike do you need to pass the motorcycle skills test in CA?

I am getting a Yamaha Vino 125cc scooter, and I need to get my M2 class license. The guy at the dealership said that I would need to take the motorcycle skills test at the DMV on a 250cc or higher bike. Then again, he also suggested that the cops are not going to bother me if I don't have a license for the scooter. Is he right?
What kind of bike do you need to pass the motorcycle skills test in CA?
I dont think they will give you a test for a motorcycle license useing a scooter :P because you would'nt have any skills pretaining to operateing a motorcycle.


Get atleast a 750cc so you wont get a ticket for holding up traffic.
What kind of bike do you need to pass the motorcycle skills test in CA?
Probably they will, if you are stopped for any other reason. Take the class its a lot of fun and you learn safety measure to use in traffic. Also you get a little break on your insurance.
Reply:I do not know, but I bet if you try, they will snatch you up, call a tow truck to carry your Vino away forever, loch the door and throw the book at you.





See if there is a BASIC RIDER COURSE near you and ask to be put on the waiting list, for a drop out. (the classes fill up in advance for the riding season, which usually means SUMMER. If you pass, it fulfils the state's requirements for a license, at least it does in other states.





So call around, you use THEIR bike and YES they usually have 250s, with standard transmissions. The class is rather high, but it is frequently subsidised by the state. (gotta pay for the gas and use of the bike, right?) Sounds ideal, for you, it may cover things you will not do again, but it is a skill ands takes practise like anything else.





And you might wind up qualified to ride anything on two or three wheels.


Is there anyway to find my VIN number to a 73 honda cb350 motorcycle?

ok on the title it has 12 numbers and thats with out the dashes. some websites dont go back later than 81 but its my uncles old bike he died when i was 16 now im 19 also since he is gone would his wife have to sign the title over to me or what
Is there anyway to find my VIN number to a 73 honda cb350 motorcycle?
It's usually stamped into the metal at or near the yoke or steering head.
Is there anyway to find my VIN number to a 73 honda cb350 motorcycle?
Its either stamped on the bikes frame near the petrol tank or on a metal plate attached to the front of the bike..
Reply:You will find the VIN stamped into the neck of the frame.


Having the title makes things easier.


She may or may not need to have the title changed before signing it over to you. Laws vary from state to state, and I don't know where you are.





When Dad died, everything that was jointly owned became hers. Everything that was his became hers. Again, this is something that can change from state to state.





Your best way to tackle it would be to work together with her, and both go to your DMV. They will have the answers for you.


Good luck.


 


Dierdre © 2008. Design by: Pocket Web Hosting